VPI Industries Scout 1.1/JMW-9T Manual de Instruções

Scout 1.1/JMW-9T Turntable Manual Setup and Instruction Manual VPI Industries, Inc., 77 Cliffwood Ave. #3B, Cliffwood, NJ 07721 Phone: 732-5

Important: Read Before Proceeding!  Read and follow the  Safety Instructions below.  Save all packing materials. The Scout should only be moved

1 Unpacking the Box The turntable and tonearm are packed very carefully to avoid damage during shipping. It is important that you save the packing mat

2 7. Verify the turntable is level by using a 9 or 12-inch bubble level front-to-back and side-to-side on the platter. If it is not level, rotate the

3  Look down at the cartridge and align it between the lines of the grid. Be careful to align the cartridge and not the tonearm headshell. You shou

4 Setting the Tracking Force and Tonearm Height Tracking force is adjusted by moving the tonearm counterweight forward and back on its shaft. If you

5 Setting the Azimuth  Set a fireplace match or coffee stirrer (something light and about 6” long) into the groove behind the mounting screws on the

6 General Use  Allow at least 20 hours of break-in time.  The motor will make some low-level noise. This will not get into the system. The motor

7 VPI Industries, Inc. Limited Warranty VPI Industries, Inc. (VPI) warrants this unit against defects in materials and/or workmanship for three (3) y